Step 4 Click the [Next] button. Page 40 Up to 16 cameras can be connected. The model numbers and statuses of each camera will be displayed in a list. Display the basic setup pages Click the desired button on the setup menu. Page Display Format Out is less than an hour. Page 44 [Language] tab Select the display language for the main monitor and for the web browser on the PC. After editing the settings, click the [OK] button to save the settings and return to the [Camera registration] tab. The registered cameras will be displayed on the screen in the order of 1, To interchange camera numbers, drag the camera image to be moved with the mouse and drop on the desired position.
Page 51 Set up Light control mode [Light control mode] Select how to control the amount of light for each camera and transmit the information to the cameras to change the camera settings.
When attempting to set the same time as used, the value of "Referenced recording days" will not already set on another time bar, the time immediately be displayed. Mark the checkbox of this item to automatically transmit Off: Neither schedule nor event recording will take place. Page 54 Set up recording for individual cameras [Advanced recording setup] Set up items such as the image capture size, frame rate and image quality for individual cameras.
Page Alarm Action Configure event-related settings [Event setup] tab Configure event-related settings such as the alarm output duration and buzzer duration. On: Display a message. Page 57 Set up camera site alarm [Advanced camera site alarm setup] Set up the action to be taken when a Panasonic alarm protocol received from a camera triggers camera site alarm. Refer to "Advanced terminal alarm setup" to set "Mode", "Recording camera", "Preset" and "Terminal output" in "Setup by cam- era" Page 58 Set up face matching alarm [Advanced face matching alarm setup] Set up the face matching alarm triggered when a previously registered face image is detected among the camera's live images.
Also refer to the Operating Instructions PDF for further information about the face matching functions. Page 59 Register face images [Face registration] Use this page to register new face images, to check already registered face images or to assign names to the face images.
Page 60 Register face images [Add] A maximum of 16 face images can be registered. If 16 face images have already been registered, add new images after having deleted some of the registered images. Page 61 Configure the advanced settings for recording and events [Advanced setup] Configure the special settings related to recording on this tab.
Set up the recording mode, alarm disarm duration and Panasonic alarm port number the port number for incoming site alarm. Page Configure The Settings Relating To Monitors [Monitor] Configure the settings relating to monitors [Monitor] The settings relating to the display of the main monitor, the live monitor connected to the recorder and the monitor of the PC con- nected via a network are configured on the setup menu - the "Advanced setup" menu - the "Monitor" page.
The settings relating to image switching such as multiscreen display and sequence display of live images are also configured on this page.
Page 64 [Stretch images to fit the areas in control screen dis- play] Mark the checkbox to enlarge the vertical size of images with the aspect ratio of to fit into the image display area on the control screen.
When the images are enlarged with this setting, camera con- trol or VMD search may sometimes not work properly in accordance with the specified coordinates or areas. Page Configure The Settings Relating To Network [Network] The settings relating to the network of the recorder are configured on the setup menu - the "Advanced setup" menu - the "Network" page. Configure the basic network settings [Basic] The basic settings relating to the network can be configured on this tab.
Refer to the "Viewnetcam. Procedure to register information for the "Viewnetcam. Page Configure The Panasonic Alarm Protocol Settings [Panasonic Alarm Protocol] Configure the Panasonic alarm protocol settings [Panasonic alarm pro- tocol] The settings to notify the PC of the event and error information when an event or an error occurs can be configured on this tab.
To display the event and error information, it is necessary that the software option is installed on the recipient PC. The "User management" page has [Basic], [User registration] and [Administrator setup] tabs. Configure the basic settings relating to user management [Basic] The settings relating to login when using the mouse, user authentication for network operations, and user levels can be config- ured on this tab. Page 72 Restrictable operations It is possible to allow or restrict the following operations for each user.
Operation Description Camera operation Camera images displayed on the main monitor can be changed. Camera control Camera control such as panning and tilting can be performed. Search and playback Recorded images can be played back and searched by VMD search. Select the user whose user information is to be edited or deleted. Page Edit The Administrator Information [Administrator Setup] Edit the administrator information [Administrator setup] The administrator information relating to the password and default screen, etc.
Page Configure The Settings Relating To Maintenance [Maintenance] Configure the settings relating to maintenance [Maintenance] The version of the recorder and disk information is displayed, and the settings relating to hard disk drives can be configured on the setup menu - the "Advanced setup" menu - the "Maintenance" page.
It is also possible to initialize the setup data of the setup pages, check the system logs and register the license on this page. Configure the settings and operations relating to the system [System management] The settings relating to the actions at an error occurrence and auto data deletion from hard disk drives can be configured on this tab. Up to logs are saved. Step 4 Click the [Next] button. Page 40 Up to 16 cameras can be connected. The model numbers and statuses of each camera will be displayed in a list.
Display the basic setup pages Click the desired button on the setup menu. Page Display Format Out is less than an hour. Page 44 [Language] tab Select the display language for the main monitor and for the web browser on the PC.
After editing the settings, click the [OK] button to save the settings and return to the [Camera registration] tab. The registered cameras will be displayed on the screen in the order of 1, To interchange camera numbers, drag the camera image to be moved with the mouse and drop on the desired position. Page 51 Set up Light control mode [Light control mode] Select how to control the amount of light for each camera and transmit the information to the cameras to change the camera settings.
When attempting to set the same time as used, the value of "Referenced recording days" will not already set on another time bar, the time immediately be displayed. Mark the checkbox of this item to automatically transmit Off: Neither schedule nor event recording will take place. Page 54 Set up recording for individual cameras [Advanced recording setup] Set up items such as the image capture size, frame rate and image quality for individual cameras. Page Alarm Action Configure event-related settings [Event setup] tab Configure event-related settings such as the alarm output duration and buzzer duration.
On: Display a message. Page 57 Set up camera site alarm [Advanced camera site alarm setup] Set up the action to be taken when a Panasonic alarm protocol received from a camera triggers camera site alarm. Refer to "Advanced terminal alarm setup" to set "Mode", "Recording camera", "Preset" and "Terminal output" in "Setup by cam- era" Page 58 Set up face matching alarm [Advanced face matching alarm setup] Set up the face matching alarm triggered when a previously registered face image is detected among the camera's live images.
Also refer to the Operating Instructions PDF for further information about the face matching functions. Page 59 Register face images [Face registration] Use this page to register new face images, to check already registered face images or to assign names to the face images. Page 60 Register face images [Add] A maximum of 16 face images can be registered.
If 16 face images have already been registered, add new images after having deleted some of the registered images. Page 61 Configure the advanced settings for recording and events [Advanced setup] Configure the special settings related to recording on this tab.
Set up the recording mode, alarm disarm duration and Panasonic alarm port number the port number for incoming site alarm. Page Configure The Settings Relating To Monitors [Monitor] Configure the settings relating to monitors [Monitor] The settings relating to the display of the main monitor, the live monitor connected to the recorder and the monitor of the PC con- nected via a network are configured on the setup menu - the "Advanced setup" menu - the "Monitor" page.
The settings relating to image switching such as multiscreen display and sequence display of live images are also configured on this page. Page 64 [Stretch images to fit the areas in control screen dis- play] Mark the checkbox to enlarge the vertical size of images with the aspect ratio of to fit into the image display area on the control screen. When the images are enlarged with this setting, camera con- trol or VMD search may sometimes not work properly in accordance with the specified coordinates or areas.
Page Configure The Settings Relating To Network [Network] The settings relating to the network of the recorder are configured on the setup menu - the "Advanced setup" menu - the "Network" page. Configure the basic network settings [Basic] The basic settings relating to the network can be configured on this tab. Refer to the "Viewnetcam. Procedure to register information for the "Viewnetcam. Page Configure The Panasonic Alarm Protocol Settings [Panasonic Alarm Protocol] Configure the Panasonic alarm protocol settings [Panasonic alarm pro- tocol] The settings to notify the PC of the event and error information when an event or an error occurs can be configured on this tab.
To display the event and error information, it is necessary that the software option is installed on the recipient PC. The "User management" page has [Basic], [User registration] and [Administrator setup] tabs. Configure the basic settings relating to user management [Basic] The settings relating to login when using the mouse, user authentication for network operations, and user levels can be config- ured on this tab.
Page 72 Restrictable operations It is possible to allow or restrict the following operations for each user. Operation Description Camera operation Camera images displayed on the main monitor can be changed. Camera control Camera control such as panning and tilting can be performed.
Search and playback Recorded images can be played back and searched by VMD search. Select the user whose user information is to be edited or deleted. Page Edit The Administrator Information [Administrator Setup] Edit the administrator information [Administrator setup] The administrator information relating to the password and default screen, etc.
Page Configure The Settings Relating To Maintenance [Maintenance] Configure the settings relating to maintenance [Maintenance] The version of the recorder and disk information is displayed, and the settings relating to hard disk drives can be configured on the setup menu - the "Advanced setup" menu - the "Maintenance" page.
It is also possible to initialize the setup data of the setup pages, check the system logs and register the license on this page. Configure the settings and operations relating to the system [System management] The settings relating to the actions at an error occurrence and auto data deletion from hard disk drives can be configured on this tab. Up to logs are saved. During recording Step 1 Step 2 Select "Off" Page Register The License Register the license When using this recorder for the first time, it is necessary to register the license for the recorder.
Step 7 Enter the "Registration key" Page Basic Operations Basic operations The recorder can be operated using the provided mouse connected to the mouse connection port on the front side of the recorder.
It is also possible to perform operations except for the settings of the recorder from the web browser. Refer to the Operating Instructions PDF for further information about the operations from the web browser.
Page 36 About the operation of on-screen keyboard Setting items can be entered using the on-screen keyboard. When clicking the [ ] icon beside the entry field, the on-screen keyboard will be displayed, and it will become possible to enter characters by clicking the character keys on the keyboard. Entry field Language selection pull-down menu Click the [ Page Setup Menu Setup menu Configuration of each setting item in the setup menu should be completed in advance to use this recorder.
The setup menu has the following levels for the setting items. On "Easy Start", the minimum settings required to operate the recorder will be performed, but other settings will remain default. First, configure the minimum settings on "Easy Start", and to configure more advanced settings, go to each setup page. Available settings on "Easy Start" Page 39 4 multi-screen segments when 4 [Model] cameras are connected in the system, 9 multi-screen seg- When Panasonic network cameras are used, the model ments when 9 cameras are connected, 16 multi-screen seg- numbers will be displayed.
Step 9 Click the [Exit] button. Display the basic setup pages Click the desired button on the setup menu. Page Display Format To return to the previous page, click the [Back] button. Page 43 [Language] tab Select the display language for the main monitor and for the web browser on the PC. After editing the settings, click the [OK] button to save the settings and return to the [Camera registration] tab. Set a port number from 1 - for use by the camera. The registered cameras will be displayed on the screen in the order of 1, Page 48 [Display Title] The camera title registered on the [Main monitor] tab of To transmit the settings to the camera, mark this item, and the monitor page can be used as display title.
Clicking edit the title displayed on the image. Mark the checkbox of this item to automatically transmit Off: Neither schedule nor event recording will take place.
Page Alarm Action Set up recording for individual cameras [Advanced recording setup] Set up items such as the image capture size, frame rate and image quality for individual cameras. Page 53 Rec. Select whether or not to display a message on a PC con- Default: 2 s nected to a network when an alarm occurs.
On: Display a message. Page 54 Set up camera site alarm [Advanced camera site alarm setup] Set up the action to be taken when a Panasonic alarm protocol received from a camera triggers camera site alarm. Refer to "Advanced terminal alarm setup" to set "Mode", "Recording camera", "Preset" and "Terminal output" in "Setup by cam- era" Also refer to the Operating Instructions PDF for further information about the face matching functions. Page 56 Register face images [Face registration] Use this page to register new face images, to check already registered face images or to assign names to the face images.
Page 57 Register face images [Add] A maximum of 16 face images can be registered. If 16 face images have already been registered, add new images after having deleted some of the registered images. Page 58 Configure the advanced settings for recording and events [Advanced setup] Configure the special settings related to recording on this tab.
Set up the recording mode, alarm disarm duration and Panasonic alarm port number the port number for incoming site alarm.
Page Configure The Settings Relating To Monitors [Monitor] Configure the settings relating to monitors [Monitor] The settings relating to the display of the main monitor, the live monitor connected to the recorder and the monitor of the PC con- nected via a network are configured on the setup menu - the "Advanced setup" menu - the "Monitor" page. The settings relating to image switching such as multiscreen display and sequence display of live images are also configured on this page.
The eco. Page Configure The Settings Relating To Network [Network] The settings relating to the network of the recorder are configured on the setup menu - the "Advanced setup" menu - the "Network" page. Configure the basic network settings [Basic] The basic settings relating to the network can be configured on this tab.
The setup menu advanced will be displayed. Page Configure The Panasonic Alarm Protocol Settings [Panasonic Alarm Protocol] Configure the Panasonic alarm protocol settings [Panasonic alarm pro- tocol] The settings to notify the PC of the event and error information when an event or an error occurs can be configured on this tab.
0コメント